PE940 epoxy coating

The amount of epoxy coating ABA.PE940 depending on the preparation of the work surface, about 1.5 kg is needed to cover one square meter with a thickness of 1000 microns.

The surface under the work must be clean, firm and free from any grease, dust, paint, oil and loose particles. Epoxy coating ABA.PE940 is supplied in two packages A and B. Always mix the two packages thoroughly. Continue mixing the ingredients for three minutes until a uniform and homogeneous mixture is obtained. Apply the prepared mixture with an airless or roller on the desired surface.

• The storage period is one year in the original packaging.
• The best storage temperature is +10 to +30 degrees Celsius.
• packing : A total of 20 kg of component A: 10 kg and component B: 10 kg

• This substance is not in the range of harmful substances for the environment, and if it comes into contact with the eyes, you should see a doctor immediately.
• Be sure to use masks, gloves and appropriate safety equipment.
• This substance is flammable. It should be kept away from heat and direct flame.

• physical state : Viscosity liquid
• Color: Gray
• Special Weight : g/cm 0/05 ± 1/82
• Composition ratio: A: 1 and component B: 1

• Purchase and price of anti-acid tile adhesive, super-lubricant, tile adhesive, concrete repairer, anti-acid mortar, rebar planting adhesive, concrete repairer, epoxy and antifreeze grout of Abadgaran company.

  With more than two decades in the field of production of chemical products for the construction industry, Abadgaran Chemical Company, in addition to producing more than a hundred types of construction chemical products, has a history of cooperation in implementation and consulting in large national, personal and corporate projects. Shimi Abadgaran Company has a large share in construction chemical products and has more than fifty production forces and laboratories. These are only a part of the extensive cooperation of chemical growers during these years. To buy and know the price of super-lubricant, tile adhesive, anti-acid mortar, rebar planting adhesive, concrete restorer, epoxy and antifreeze grout and polymer mortars, etc., you can contact Shimi Abadgaran company.

  the address of Central office

  • Shahriar Tehran
  • Contact number: 02165741139

  Address of Shahriar factory

  • No. 16, Shahriar Safadasht, next to Safadasht Industrial Estate, Amir Abad St., Nilofar Alley, 7
  • Contact number: 09129383554
  • Contact number: 02165741139
  • Abadgaran Chemical Company’s Instagram: abadgaran.abbariki